600DIMP4KA

DISCONTINUED - 36W 4000K switch/push dimmable 600x600mm TP(a) LED slim panel light with Hytronik driver

OBSOLETED

White | 36W | 4000K | 3600 lm | 30,000 hrs | Dimmable

 

         icon-led  icon-5year    

 

600DIMP4KA

OBSOLETED

White | 36W | 4000K | 3600 lm | 30,000 hrs | Dimmable

 

         icon-led  icon-5year    

 

SKU: 5013845053938 Category:
Categories: Obsoleted
SKU: 5013845053938
More Information
Features

This light panel is designed to fit into the space normally occupied by a standard 600mm x 600mm ceiling tile, it is therefore a direct replacement for traditional modular fluorescent fittings used in many offices, educational and commercial applications.

PERFECT FOR OFFICE, COMMERCIAL AND EDUCATIONAL APPLICATIONS

  • Aluminium frame
  • 100 lm / W
  • Low glare and even shadow free light distribution ensures suitability for a variety of applications: visually superior to
    standard fluorescent panels
  • 4000K colour temperature, edge lit: offering a bright neutral white lighting effect
  • Ultra slim profile and a white trim finish to match the majority of T. bar ceilings
  • Can be recessed in the ceiling or suspended from wires (suspension kit not included, part code SUSPACK)
  • SUSPACK cable length: 1m / panel max. suspension height: 940mm
  • Surface mounting can be achieved through the mounting box available separately, part code SURFMK (supplied in kit form)
  • Ability to be converted into an emergency luminaire: EBPM3 emergency battery pack required or see SEEBPM3 for self test version
  • CRI Ra:≥80: High CRI to minimise colour distortion of illuminated products
  • Supplied with Hytronik branded driver
  • M.O.M: 1 / O.P.Q: 5
  • SWITCH/PUSH DIMMABLE AND 1-10V COMPATIBLE STANDARD LED PANELS
  • For switch/push dimming use with a mains voltage ‘push to make’ / retractive wall switch
  • For 1-10V dimming use with a standard 1-10V compatible rotary dimmer. If using a rotary dimmer to turn the panel on/off ensure the dimmer has on/off function
  • Max 50m distance from the last driver to the dimming control device
  • Up to 20 fittings can be installed on each circuit
  • ‘PUSH TO MAKE’ FUNCTIONALITY
  • Push and hold the switch to increase the light level to the highest point. Release the switch and then push and hold again to dim through to the lowest point
  • Release the switch when the desired lighting level is achieved
  • Short press and release turns the light off
  • When the light is off, a short press and release turns the light back on again at the same level as when turned off
Specification
Lamp Specifications:
Luminaire lumens (with diffuser) 3600 lm
Lumens from chip (no diffuser) 5040 lm
Useful lumens 3500 lm
Rated Wattage 36W
Rated luminous flux 3500 lm
Nominal life time of the lamp 30,000 hrs
Colour temperature 4000K
Number of switching cycles before premature lamp failure 15,000
Warm-up time up to 60 % of the full light output <1s
Is this product dimmer compatible? No
Nominal beam angle 120°
Rated power wattage 36W
Rated lamp lifetime 30,000 hrs
Lamp power factor 0.9
Lumen maintenance factor at end of nominal life >70%
Starting time <0.5s
Colour rendering 78 Ra
Colour consistency Within a 6 step Macadam ellipse
Rated peak intensity 1150cd
Rated beam angle 120°
Voltage / Frequency 240V~50Hz
Lumens per watt Up to 100 lm / W
Weight (kg)
TSI Code 406599694
Please note: there will be a slight reduction in lumen output if using a dimmer
Not suitable for accent lighting