CIRPRISMW3
DISCONTINUED - Emergency + multi-function microwave sensor Fresh Prince circular LED utility fitting with prismatic diffuser
High output, energy saving utility LED wall / ceiling fixtures with standard, emergency & multi-function microwave control versions. Both opal & clear versions are available for either smooth diffused effect or maximum light output. Diffusers are supplied not fitted to bases and fully captive diffuser fixing screws are utilised to save installation time. Multi-function microwave versions provide the best in flexibility & energy saving options.
High performing, durable range of functional bulkheads suitable for open access and communal areas.
MULTI-PURPOSE UTILITY FITTINGS, PERFECT FOR OUTDOOR APPLICATIONS
Battery replacement service available. Click HERE for details.
- Full circular LED array
- Hinged gear tray
- Captive fixing screws
- Four 20mm cable entries on the side and one to the rear
- 3 hour maintained mode as standard which can also be configured for non maintained operation
- Battery - Li-Ion 3.2V 1500mAh
- Battery 1 year warranty - Replacement battery code: EB11
- M.O.M: 1 / O.P.Q: 1
- Detection sensitivity adjustable - 10/50/75/100%
- Daylight sensor adjustable - 5/15/50 Lux/Disable
- Mounting height - maximum 6mtr
- Detection zone - maximum 16mtr diameter x 6mtr height
- Detection angle - 150° (wall mounted), 360° (ceiling mounted)
- Standard On/Off Mode: operation at 100% light level then off after last presence detection. Operation on time can be set at 5 seconds/90 seconds/3 minutes/10 minutes
- “Corridor Mode”: operation at 100% light level after last presence detection which can be set at 5 seconds/90 seconds/3 minutes/10 minutes, then continuous operation at 10% light level
- “Corridor” & Off Mode: operation at 100% light level after last presence detection which can be set at 5 seconds/90 seconds/3 minutes/10 minutes, then operation at 10% light level which can be set at 30 seconds or 10 minutes, then off
| Lamp Specifications: | |
|---|---|
| Luminaire lumens (with diffuser) | 1600 lm |
| Lumens from chip (no diffuser) | 1750 lm |
| Rated Wattage | 18W |
| Rated luminous flux | 1550 lm |
| Nominal life time of the lamp | 35,000 hrs |
| Colour temperature | 4000K |
| Number of switching cycles before premature lamp failure | 15,000 |
| Warm-up time up to 60 % of the full light output | Instant full light |
| Is this product dimmer compatible? | No |
| Nominal beam angle | 120° |
| Rated power wattage | 18W |
| Rated lamp lifetime | 35,000 hrs |
| Lamp power factor | >0.9 |
| Lumen maintenance factor at end of nominal life | ≥0.70 |
| Starting time | <0.1s |
| Colour rendering | 80 Ra |
| Colour consistency | Within a 6 step Macadam ellipse |
| Rated peak intensity | 520cd |
| Rated beam angle | 120° |
| Voltage / Frequency | 240V~50Hz |
| Lumens per watt | Up to 77 lm / W |
| Weight (kg) | 1.75 |
| TSI Code | 404494979 |
| Not suitable for accent lighting | |
SPECIFICATION
-
+
DOWNLOADS
-
+
