Emergency Fresh Prince square LED utility fitting with opal diffuserMore Information
High output, energy saving utility LED wall / ceiling fixtures with standard, emergency & multi-function microwave control versions. Both opal & clear versions are available for either smooth diffused effect or maximum light output. Diffusers are supplied not fitted to bases and fully captive diffuser fixing screws are utilised to save installation time. Multi-function microwave versions provide the best in flexibility & energy saving options.
High performing, durable range of functional bulkheads suitable for open access and communal areas.
MULTI-PURPOSE UTILITY FITTINGS, PERFECT FOR OUTDOOR APPLICATIONS
Battery replacement service available. Click HERE for details.
- Full square LED array
- Hinged gear tray
- Captive fixing screws
- Four 20mm cable entries on the side and one to the rear
- 3 hour maintained mode as standard which can also be configured for non maintained operation
- Replacement battery code: EB11
- M.O.M: 1 / O.P.Q: 1
|Luminaire lumens (with diffuser)||1400 lm|
|Lumens from chip (no diffuser)||1750 lm|
|Rated luminous flux||1350 lm|
|Nominal life time of the lamp||35,000 hrs|
|Number of switching cycles before premature lamp failure||15,000|
|Warm-up time up to 60 % of the full light output||Instant full light|
|Is this product dimmer compatible?||No|
|Nominal beam angle||120°|
|Rated power wattage||18W|
|Rated lamp lifetime||35,000 hrs|
|Lamp power factor||>0.9|
|Lumen maintenance factor at end of nominal life||≥0.70|
|Colour rendering||80 Ra|
|Colour consistency||Within a 6 step Macadam ellipse|
|Rated peak intensity||520cd|
|Rated beam angle||120°|
|Voltage / Frequency||240V~50Hz|
|Lumens per watt||Up to 77 lm / W|
|Not suitable for accent lighting|
You will need Adobe Acrobat Reader to access and print PDFs.