NEW Chameleon Range

Available in either EternaPro or EternaEco

See below for the features in both Chameleon ranges

Watch the videos below to find out more about our Chameleon range

PART 1 - Introduction and specifications

PART 2 - An in depth look at the microwave sensor options

IP65 CIRCULAR LED COLOUR TEMPERATURE SELECTABLE MODULAR FITTINGS

A flexible range of LED wall/ceiling fittings with standard, emergency, microwave, microwave emergency and photocell variants. The ability to easily choose the colour temperature to suit the installation is complimented with the accessories available. The accessories enable you to transform the fittings from utility to decorative. Along with different colour options to suit the application as required.

  • 18W
  • 3100K/4200K/6400K
  • 1580 lm/1640 lm/1600 lm
  • 35,000 hrs
  • IP65
  • A+ Rated

For more information, please see the products individual website pages:

Products available in the EternaPro CO18 range:

  • Colour temperature selectable – options of 3100K, 4200K & 6400K easily set by a dip switch on the driver
  • Full circular LED array
  • Hinged gear tray
  • Push fit terminal block
  • Stainless Steel captive fixing screws • Polycarbonate construction
  • Central BESA box mounting option on the base and four 20mm side entries
  • Optional accessories (available separately – see page 2): prismatic diffuser and full, eyelid and grill trims
  • M.O.M: 1 / O.P.Q: 10
  • EMERGENCY VERSION: 3 hour maintained mode as standard which can also be configured for non maintained operation
  • PHOTOCELL VERSION: Photocell for dusk to dawn operation
  • PHOTOCELL VERSION: Photocell version cannot be used with any of the trims
  • MW SENSOR VERSION: Adjustable microwave sensor: with options to adjust 2-50 lux or disable, detection range 10-100% and time 5 secs – 15 mins
  • MW SENSOR VERSION:The microwave sensor is discreetly placed behind the diffuser: making it unobtrusive so there is no compromise to the appearance of the fitting or the room design

IP65 CIRCULAR LED ECONOMY MODULAR FITTINGS

A range of LED wall/ceiling fittings with standard, emergency, microwave, microwave emergency and photocell variants. The accessories enable you to transform the fittings from utility to decorative. Along with different colour options to suit the application as required.

  • 12W
  • 4200K
  • 1200 lm
  • 35,000 hrs
  • IP65
  • A++ Rated

For more information, please see the products individual website pages:

Products available in the EternaEco VECO12 range:

  • Polycarbonate construction
  • One rear and four side 20mm entries
  • Push fit terminal block
  • Stainless Steel captive fixing screws
  • Optional accessories (available separately – see page 2): prismatic diffuser and full, eyelid and grill trims
  • M.O.M: 1 / O.P.Q: 10
  • EMERGENCY VERSION: 3 hour maintained mode as standard which can also be configured for non maintained operation
  • PHOTOCELL VERSION: Photocell for dusk to dawn operation
  • PHOTOCELL VERSION: Photocell version cannot be used with any of the trims
  • MW SENSOR VERSION: Adjustable microwave sensor: with options to adjust 2-50 lux or disable, detection range 10-100% and time 5 secs – 15 mins
  • MW SENSOR VERSION:The microwave sensor is discreetly placed behind the diffuser: making it unobtrusive so there is no compromise to the appearance of the fitting or the room design

Available accessories

click on the code for more information on each product: