600DIMPAN
DISCONTINUED - Dimmable 40W 600x600mm LED slim panel light
This light panel is designed to fit into the space normally occupied by a standard 600mm x 600mm ceiling tile, it is therefore a direct replacement for traditional modular fluorescent fittings used in many offices and commercial applications.
PERFECT FOR OFFICE, COMMERCIAL AND EDUCATIONAL APPLICATIONS
- Low glare and even shadow free light distribution ensures suitability for a variety of applications: visually superior to standard fluorescent panels
- 4000K colour temperature, edge lit: offering a pleasing lighting effect
- Ultra slim profile and a white trim finish to match the majority of T. bar ceilings
- Can be recessed in the ceiling or suspended from wires
- Surface mounting can be achieved through the mounting box available separately
- Ability to be converted into an emergency luminaire
- CRI Ra:≥80: High CRI to minimise colour distortion of illuminated products
- Supplied with Hytronik branded driver
- M.O.M: 1 / O.P.Q: 5
- For switch/push dimming use with a mains voltage ‘push to make’ / retractive wall switch
- For 1-10V dimming use with a standard 1-10V compatible rotary dimmer. If using a rotary dimmer to turn the panel on/off ensure the dimmer has on/off function
- Max 50m distance from the last driver to the dimming control device
- Up to 20 fittings can be installed on each circuit
- Push and hold the switch to increase the light level to the highest point. Release the switch and then push and hold again to dim through to the lowest point
- Release the switch when the desired lighting level is achieved
- Short press and release turns the light off
- When the light is off, a short press and release turns the light back on again at the same level as when turned off
| (Pre-dimmed) Lamp Specifications: | |
|---|---|
| Luminaire lumens (with diffuser) | 3300 lm |
| Lumens from chip (no diffuser) | 4600 lm |
| Useful lumens | 3200 lm |
| Rated Wattage | 40W |
| Rated luminous flux | 3200 lm |
| Nominal life time of the lamp | 35,000 hrs |
| Colour temperature | 4000K |
| Number of switching cycles before premature lamp failure | 30,000 |
| Warm-up time up to 60 % of the full light output | Instant full light |
| Is this product dimmer compatible? | Yes |
| Nominal beam angle | 120° |
| Rated power wattage | 40W |
| Rated lamp lifetime | 35,000 hrs |
| Lamp power factor | >0.9 |
| Lumen maintenance factor at end of nominal life | >0.7 |
| Starting time | <0.5s |
| Colour rendering | 80 Ra |
| Colour consistency | Within a 6 step Macadam ellipse |
| Rated peak intensity | 1480cd |
| Rated beam angle | 120° |
| Voltage / Frequency | 240V~50Hz |
| Lumens per watt | Up to 82 lm / W |
| Weight (kg) | 2.915 |
| TSI Code | 405435513 |
| Not suitable for accent lighting | |
| Please note: there will be a slight reduction in lumen output if using a dimmer | |
SPECIFICATION
-
+
DOWNLOADS
-
+
