600P4K
36W 4000K 600x600mm TP(b) LED slim panel light with Lifud driver
White | 36W | 4000K | 3600 lm | 30,000 hrs
600P4K
White | 36W | 4000K | 3600 lm | 30,000 hrs
These light panels are designed to fit into the space normally occupied by standard 600mm x 600mm ceiling tiles, and are therefore a direct replacement for traditional modular fluorescent fittings used in many offices, educational and commercial applications
- Aluminium frame
- Supplied with Lifud branded driver
- Low glare and even shadow free light distribution ensures suitability for a variety of applications: visually superior to standard fluorescent panels
- 4000K colour temperature, edge lit: offering a bright neutral white lighting effect
- Ultra slim profile and a white trim finish to match the majority of T. bar ceilings
- CRI Ra:≥80: High CRI to minimise colour distortion of illuminated products
- Surface mounting can be achieved by using screwless kit: SURFACEMK
- Can be recessed in the ceiling or suspended from wires: see PANSUSKIT suspension kit
- Ability to be converted into an emergency luminaire: see EBPM3, SEEBPM3, EBPM3LI
- M.O.M: 1 / O.P.Q: 5
![](https://www.eterna-lighting.co.uk/wp-content/uploads/2016/12/pan600_dim.jpg)
![](https://www.eterna-lighting.co.uk/wp-content/uploads/2023/02/ri-110px-non-replace-light-source-e1676635485152.jpg)
![](https://www.eterna-lighting.co.uk/wp-content/uploads/2023/02/ri-110px-replace-control-gear-pro-e1676633971648.jpg)
Lamp Specifications: | |
---|---|
Luminaire lumens (with diffuser) | 3600 lm |
Lumens from chip (no diffuser) | 5040 lm |
Useful lumens | 3500 lm |
Rated Wattage | 36W |
Rated luminous flux | 3500 lm |
Nominal life time of the lamp | 30,000 hrs |
Colour temperature | 4000K |
Number of switching cycles before premature lamp failure | 15,000 |
Warm-up time up to 60 % of the full light output | <1s |
Is this product dimmer compatible? | No |
Nominal beam angle | 120° |
Rated power wattage | 36W |
Rated lamp lifetime | 30,000 hrs |
Displacement factor | 0.90 |
Lumen maintenance factor at end of nominal life | >70% |
Starting time | <0.5s |
Colour rendering | 78 Ra |
Colour consistency | Within a 6 step Macadam ellipse |
Rated peak intensity | 1150cd |
Rated beam angle | 120° |
Voltage / Frequency | 240V~50Hz |
Lumens per watt | Up to 100 lm / W |
Please note: there will be a slight reduction in lumen output if using a dimmer | |
Not suitable for accent lighting |
Can this panel be used in a freezer?
No, the product is not IP rated. It is not designed to be used in the freezer.