600P4KUDIM
DISCONTINUED - 600 x 600mm Dimmable Low Glare UGR≤19 Louvered Panel
This stylish indirect LED panel is primarily intended for areas where low glare compliance is required, but also suits any installation where high quality installation appearance & superior lighting performance is desired. Specifically engineered to achieve UGR≤19 and offering even light distribution with the minimum number of luminaires per installation.
- Eliminates the need for TP(a) or TP(b) compliance due to steel construction
- Includes a plug and play constant current non-dimmable LED driver
- High CRI (≥80:) to minimise colour distortion of illuminated area & objects
- 4000K colour temperature offering a bright neutral white lighting effect
- White finish matching the majority of exposed T bar ceilings
- Push fit wiring terminal direct into the LED driver, terminal capacity up to 1.5mm2
- Emergency option using emergency battery pack EBPM3 (M3) or see SEEBPM3 (M3 Self Test)
- Switch/push dimmable and 1-10V compatible led panel
- Hytronik Driver
- For switch/push dimming use with a mains voltage ‘push to make’ / retractive wall switch
- For 1-10V dimming use with a standard 1-10V compatible rotary dimmer. If using a rotary dimmer to turn the panel on/off ensure the dimmer has an on/off function
- Max 50m distance from the last driver to the dimming control device
- Up to 20 fittings can be installed on each circuit
- PUSH TO MAKE’ FUNCTIONALITY:
- Push and hold the switch to increase the light level to the highest point. Release the switch and then push and hold again to dim through to the lowest point
- Release the switch when the desired lighting level is achieved
- Short press and release turns the light off
- When the light is off, a short press and release turns the light back on again at the same level as when turned off
- M.O.M: 1 / O.P.Q: 5
| (Pre-Dimmed) Lamp Specifications: | |
|---|---|
| Luminaire lumens (with diffuser) | 3150 lm (3110 lm with dimmer driver) |
| Lumens from chip (no diffuser) | 3420 lm |
| Useful lumens | 3020 lm |
| Rated Wattage | 30W |
| Rated luminous flux | 3020 lm |
| Nominal life time of the lamp | 40,000 hrs |
| Colour temperature | 4000K |
| Number of switching cycles before premature lamp failure | 15,000 |
| Warm-up time up to 60 % of the full light output | Instant full light |
| Is this product dimmer compatible? | Yes |
| Nominal beam angle | 102° |
| Rated power wattage | 30W |
| Rated lamp lifetime | 40,000 hrs |
| Lamp power factor | >0.9 |
| Lumen maintenance factor at end of nominal life | ≥0.70 |
| Starting time | <0.1s |
| Colour rendering | ≥80 |
| Colour consistency | Within a 6 step Macadam ellipse |
| Rated peak intensity | 1290cd |
| Rated beam angle | 102° |
| Voltage / Frequency | 240V~50Hz |
| Lumen efficacy | 105 lm / W |
| Class 2 double insulated | |
| Not suitable for accent lighting | |
SPECIFICATION
-
+
DOWNLOADS
-
+
