SELB4FTEM3
Self-Test 4FT emergency LED batten
White | 23W | 4200K | 2930 lm | 35,000 hrs | IP20
SELB4FTEM3
White | 23W | 4200K | 2930 lm | 35,000 hrs | IP20
Features
Full photometric data available to enable lighting designs. Light output is equivalent or superior to traditional fluorescent battens
- Pressed steel body and polycarbonate diffuser
- LED tray can be removed from the housing for easy installation
- 20mm knockout glands at each end for through wiring options
- BESA box mounting
- Gear tray retaining straps
- Push terminal connections
- >120 lm/W
- Automatic testing in accordance with BS EN 62034
- Pre-wired EM3 for easy installation
- LED glows green in standby mode and super bright white light in the event of a mains failure
- Minimum 3 hour functionality in emergency mode
- 118 lumens in emergency mode
- Battery – Ni-Cd 3.6V 2000mAh
- Battery 1 year warranty – Replacement battery code: EB2
- M.O.M: 1 / O.P.Q: 6
Specification
| Lamp Specifications: | |
|---|---|
| Luminaire lumens (with diffuser) | 2930 lm |
| Lumens from chip (no diffuser) | 3200 lm |
| Useful lumens | 2820 lm |
| Rated Wattage | 23W |
| Rated luminous flux | 2820 lm |
| Nominal life time of the lamp | 35,000 hrs |
| Colour temperature | 4200K |
| Number of switching cycles before premature lamp failure | >15,000 |
| Warm-up time up to 60 % of the full light output | Instant full light |
| Is this product dimmer compatible? | No |
| Nominal beam angle | 120° |
| Rated power wattage | 23W |
| Rated lamp lifetime | 35,000 hrs |
| Lamp power factor | >0.9 |
| Lumen maintenance factor at end of nominal life | >0.7 |
| Starting time | <0.1s |
| Colour rendering | >80 Ra |
| Colour consistency | Within a 6 step Macadam ellipse |
| Rated peak intensity | 810cd |
| Rated beam angle | 120° |
| Voltage / Frequency | 240V~50Hz |
| Not suitable for accent lighting | |
Downloads
