SELB5FTEM3

DISCONTINUED - Self-Test 5FT emergency LED batten

Full photometric data available to enable lighting designs. Light output is equivalent or superior to traditional fluorescent battens
  • Pressed steel body and polycarbonate diffuser
  • LED tray can be removed from the housing for easy installation
  • 20mm knockout glands at each end for through wiring options
  • BESA box mounting
  • Gear tray retaining straps
  • Push terminal connections
  • >120 lm/W
  • Automatic testing in accordance with BS EN 62034
  • Pre-wired EM3 for easy installation
  • LED glows green in standby mode and super bright white light in the event of a mains failure
  • Minimum 3 hour functionality in emergency mode
  • 118 lumens in emergency mode
  • Battery - Ni-Cd 3.6V 2000mAh
  • Battery 1 year warranty - Replacement battery code: EB2
  • M.O.M: 1 / O.P.Q: 6
 
Lamp Specifications:
Luminaire lumens (with diffuser) 4800 lm
Lumens from chip (no diffuser) 5100 lm
Useful lumens 4600 lm
Rated Wattage 38W
Rated luminous flux 4600 lm
Nominal life time of the lamp 35,000 hrs
Colour temperature 4200K
Number of switching cycles before premature lamp failure >15,000
Warm-up time up to 60 % of the full light output Instant full light
Is this product dimmer compatible? No
Nominal beam angle 120°
Rated power wattage 38W
Rated lamp lifetime 35,000 hrs
Lamp power factor >0.9
Lumen maintenance factor at end of nominal life >0.70
Starting time <0.1s
Colour rendering >80 Ra
Colour consistency Within a 6 step Macadam ellipse
Rated peak intensity 1333cd
Rated beam angle 120°
Voltage / Frequency 240V~50Hz
Not suitable for accent lighting
 

SPECIFICATION

- +

DOWNLOADS

- +

Lighting design service

Eterna have a qualified, experienced and professional lighting design team ready to help you with all your requests from single room offices to multi floor commercial buildings and warehouses. The team also specialise in emergency lighting placement and keeping your plans within budget.

Find out more +